Engine Repairs and Reconditioning in Bundaberg, QLD
What is included
What Is Included in Our Engine Repairs and Reconditioning
- Before anything comes apart, we ask what the engine did: knocking, smoke, losing oil, overheating or going quiet.
- The engine is stripped and every part is laid out, cleaned and kept together in order.
- Cylinder bores are measured for wear and taper with a gauge, not judged by eye.
- Crankshaft journals and bearings are read for scoring, wear and any sign of oil starvation.
- The cylinder head is checked for flatness and for cracks, and the valves and seats are inspected.
- Worn parts are listed with their measurements so you can see why each is being replaced.
- The engine is reassembled to its specifications, filled with fresh oil, and run to bring it up to temperature.
Why us
Why Choose Us for Engine Repairs and Reconditioning?
Accountable for every job, long after the day
Every engine repairs and reconditioning job is done by the people who will still be here next year.
Tested and signed off before we leave
Everything we touch on your engine repairs and reconditioning is tested before we go, you get walked through exactly what was done.
Local automotive mechanics, not a call centre
An automotive mechanic answers the phone and the same faces come back if the job runs over a day.
How the job runs
Why the measurements decide the rebuild
What the engine has been doing
Tell us how it failed or how it has been behaving: smoke colour, oil use, a knock that comes and goes, a recent overheat. We cannot know the extent until it is apart, and we will say so on the phone.
The strip report and quote
Once the engine is stripped we measure the bores, crank, head and bearings and explain what we found. The quote lists what is worn, what is within limits, and what is unknown, with the work set out part by part.
Rebuild and handover
The engine is built back up in the order it came apart, with fresh oil and the parts measured against specification. When you collect the vehicle, we explain how to run the engine in and what to watch for early on.
Common questions
Frequently Asked Questions
Which services do you offer?
Car servicing and maintenance, logbook servicing, general mechanical repairs, brake repairs and replacement, car diagnostics and fault finding, roadworthy certificates and safety inspections, diesel vehicle repairs and servicing, auto radiator repair, suspension and steering repairs, clutch and transmission repairs, engine repairs and reconditioning, auto tune ups, wheel alignments, and diesel ECU remapping. Each one has its own page on this site.
Do you work on diesel vehicles?
Yes. Diesel vehicle repairs and servicing is one of our services, and diesel ECU remapping is another. Tell us the model and the kilometres when you book.
Are you a Repco Authorised Service Centre?
Yes. All Automotive Services is a Repco Authorised Service Centre.
Do you do clutch and transmission repairs?
Yes. Clutch and transmission repairs is one of our services. Tell us what the clutch or gearbox does and when, and the make, the year and the kilometres, so we know what we are looking at.
Where is the workshop?
Shed 2, 93 Bargara Road, Bundaberg East QLD 4670. You are welcome to visit the workshop. Ring first so we know what you are bringing.
What are your opening hours?
We are open 24/7. We also offer an early drop-off service, so ask about it when you book.
Can I drop my vehicle off early?
We offer an early drop-off service. Ask about it when you book, so we know when the vehicle is coming and what it needs.
How do I book?
Ring 0495 033 421 or email allautomotiveservices@outlook.com. Tell us what the vehicle is doing, when it started, and the make, the year and the kilometres if you know them.
Can you service my vehicle to its logbook?
Logbook servicing is one of our services. We read the kilometres on the dash and do the service the logbook lists for that distance. Bring the logbook, or the service history you have, when you come in.
My warning light is on. What happens next?
We plug in a scan tool and read the fault codes and the live data, then test the part the readings point to. A code names a symptom, so it is where the testing starts and not where it ends.
Do you do roadworthy inspections?
Yes, roadworthy inspections are one of our services. We check the brakes, tyres, steering, suspension, lights and body, and tell you what we found. If you need something specific from the inspection, say so when you ring.
Do you do diesel ECU remapping?
Yes. Diesel ECU remapping is one of our services. Tell us the make, the model, the year and what the vehicle tows or carries when you ring, and we will tell you how we would go about it.
Related work
Other jobs we get called out for
auto tune up service
Spark plugs, filters, ignition parts and the battery checked and replaced where worn, so the engine starts and runs the way it should. You bring the vehicle and tell us how it runs now.
Read morewheel alignment
Wheel angles measured on the rack and set back where they belong. Bring the vehicle and tell us how it pulls, wanders or wears its tyres.
Read morediesel ECU remapping
Changing the settings in a diesel's engine computer that control fuel and boost, after the engine has been checked. You bring the vehicle and tell us what it tows or carries.
Read moreReady when you are
Book Engine Repairs and Reconditioning in Bundaberg Today
Tell us what the engine did just before it stopped or got worse: a bang, a knock that grew, white smoke, or a dipstick that showed milky oil. Photos of the oil on the dipstick or cap help us a lot.
0495 033 42124/7
Not urgent? Send us the job instead